How To Choose And Replace The Air Filter Cotton?

Speaking of air filter cotton, don't you all know? This is a filtering medium. The air filter cotton can filter and purify the pollution gas, dust particles and exhaust gas contained in the air. So how to choose and replace the air filter cotton? The following editors will explain it for everyone. Let's take a look at it if you want to know!

1. Grasp the main influencing factors to choose, such as high temperature gas, flammable dust, etc .;

2, The filtering performance of filter cotton should meet the conditions and special requirements in the production process;

3. Gas temperature: The temperature of the dusty gas is a very important factor. Generally, the gas lower than 130 ℃ is called normal temperature gas, and the gas higher than 130 ℃ is called high temperature gas, so it can be divided into the selection of filter material. For these two types, namely normal temperature filter material and high temperature filter material;

4. Humidity of the gas: Dust-containing gases can be divided into three types according to their relative humidity. When the relative humidity is below 30%, it is a dry gas, and between 30% and 80% is a general state. Above 80% It is a high-humidity gas. For high-humidity gas, condensation will occur when the gas is cooled when it is at a high temperature. This will cause the surface of the filter bag to become fouled and clogged, and it will easily corrode the material. This is also what we need to choose when choosing. Pay attention

5. Select a filter with a longer service life as much as possible, which can not only save operating costs, but also meet the discharge requirements of standards;

6. Comparison of prices, beware that some bad businesses take advantage of price concessions and sell some inferior products. When choosing, shop around and don't try to be cheap.

Method of choosing:

First, look at the material

High-quality air filter cotton is made of organic synthetic fibers with high elasticity, high tensile strength, and break resistance. It is manufactured with high-quality high-quality water-based resin glue and processed through dipping and other processes. It is reinforced with high-performance polyester cloth or fiber mesh, so it can prevent any fibers from falling off and leaking. If the filter cotton you use appears fiber shedding and hair loss, it may be a problem of the raw materials and manufacturing process of the filter cotton.

Two, weighing

The weight of filter cotton should be 560-620 grams per square meter. The higher the weight, the better the quality, and the better the effect; if the weight is insufficient, the density is not enough, and the filtering effect is greatly reduced. Some manufacturers on the market in order to save Cost, cut corners, so when you buy filter cotton, do more comparisons, choose high-quality manufacturers with weight and reputation, don't just try to be cheap.

Three, rubber content

Filter cotton is divided into two types: surface spray glue and three-dimensional spray glue. Surface glue filter cotton is coated with glue on the surface during production, and three-dimensional glue filter cotton is glued on the inside. Therefore, the three-dimensional sprayed filter cotton has better effect and longer service life. If the amount of glue is not uniform, the viscosity is small, the quality of the glue is not good, and the adsorption effect of dust and fibers is poor, the phenomenon of hair loss and slag may occur.

In summary, when choosing filter cotton, try to shop around, don't be greedy for cheap, low-quality filter cotton, which seriously affects the use of the equipment and fails to achieve the best filter effect.

In summary, before selecting, you still need to have a clear understanding and understanding of air filter cotton, so that you can choose the right air filter cotton and avoid blind selection.